How To Videos

Video Installation Resource Library

Nohr-S® Polyurea Pigmented Kit

This video is about Nohr-S® Polyurea Pigmented Kit.  An in-depth look into the install.  Contact us if you have questions.

Nohr-S® Polyurea Full Flake Kit

This video is about Nohr-S® Polyurea Full Flake Kit.  This is our toughest kit!! Longest Lasting and most impact resistant.   Contact us for more information.

XtremeSet100™ Repair-Filler Introduction

Legacy Industrial’s Xtreme Set 100 is a must have when installing an epoxy or polyurea floor system or just repairing concrete!

Xtreme Set 100, is the fastest and easiest crack, joint and spall repair product available today. Polyurea technology allows for an extremely strong and efficient product for DIY or Pro Installed floors. Dry and sand-able in 20 minutes. 100% Solids Formula, Mix Ratio: 1:1 – no waste and no mistakes!! Filler: locally supplied dry sand (recommended). Use for all types of concrete repairs when you are against the clock or the temperature is low. Use our optional squeeze bottles for easy application of this product. Temps: -20 to 130 deg f. Exterior or Interior Use.

DeltaDye® Concrete Stain

 This video shows DeltaDye® Concrete Stain in action!  This video was filmed in San Fransisco, California.   Although we no longer manufacture these colors you might get a similar effect from Bronze/Terra Cotta or Bronze/Sienna Leather.  Nohr-S® Polyurea Clear Kit was used to seal.   Contact us for more information.

XtremeSet100™ Repair-Filler Up-Close

Legacy Industrial’s Xtreme Set 100 is a must have when installing an epoxy or polyurea floor system or just repairing concrete!

Xtreme Set 100, is the fastest and easiest crack, joint and spall repair product available today. Polyurea technology allows for an extremely strong and efficient product for DIY or Pro Installed floors. Dry and sand-able in 20 minutes. 100% Solids Formula, Mix Ratio: 1:1 – no waste and no mistakes!! Filler: locally supplied dry sand (recommended). Use for all types of concrete repairs when you are against the clock or the temperature is low. Use our optional squeeze bottles for easy application of this product. Temps: -20 to 130 deg f. Exterior or Interior Use.

HellFire® Concrete Coating

This video shows our HellFire® Concrete Coating without clear-coat.

Nohr-S® Polyurea Coating Product

This product exhibits excellent chemical/wear resistance and is suitable for heavy pedestrian and vehicular traffic. Nohr-S Polyurea Coating®is available for use as a clear sealer or choose from six attractive colors(via pigment packs). In addition, Nohr-S Polyurea Coating®is well suited for vinyl flake/chip broadcasting or as a gloss sealer over stained concrete. It has an unlimited pot-life and does not require additional products for a successful installation. (2) coats are recommended for best coverage, a 3rd coat is acceptable but is optional. Unlike some single component products this material covers very well and produces an attractive gloss. Vehicular traffic may resume after only 72 hours of cure. Coverage: Approx: 225-300 sq ft per gal, substrate dependent. Choose Legacy Industrial’s HDGrip-Soft-Skid additive for a non-skid but cleanable floor. Product is supplied clear, select pigment pack for opaque color.

Legacy Industrial's Metallic Epoxy

This video-short is about Legacy Industrial’s Metallic Epoxy Kit! Demonstrating an interior install.  You can too!

Legacy Industrial's Metallic Epoxy

Legacy Industrial’s Metallic Epoxy Video.  Demonstrating a garage installation.

DeltaDye® Concrete Stain

Legacy Industrial’s DeltaDye® Concrete Stain being used in a garage application, sealed with our SEC Sealer.

Nohr-S® Polyurea Coating Kit Clear

A fast paced look at actual floors being created using Legacy Industrial’s Nohr-S® Polyurea.

Legacy Industrial's Channel Trailer

Legacy Industrial’s Channel Trailer gives a brief look at our products.

Full Flake Epoxy Garage Floors

A fast paced look at actual floors being created using Legacy Industrial polymer coating products.

HD Garage Kit

Legacy Industrial’s HD Garage Kit with Nohr-S Polyurea Clear Coats!

Our HD Garage Kit is still the best value in garage coating systems. Tools, Primer and mixing bucket are all INCLUDED with this kit. Low cost married with High quality makes this our best selling kit to date!

Legacy Industrial

Nohr-S® Polyurea Coatings, Epoxy Kits, Concrete Repair Supplies, DeltaDye® Concrete Stain, & Decorative Concrete Products

Shop By Application

legacy-industrial-logo-wht

Legacy Industrial Corp. is the nation's foremost supplier of high performance concrete coatings, sealers, stains, concrete repair and decorative concrete products. Clients choose Legacy Industrial because we know concrete-floors and we help them succeed!

Customer Service

Call Today
888-652-0333

Email Questions
[email protected]

Address
Legacy Industrial Corp.
12386 State Rd. 535 #450
Orlando, FL 32836

femme-collection-payment-icons

Pin It on Pinterest